11 Measures to Spray Paint Your Car Like the Professionals – Auto Bodywork Paint Repair
You will be surprised to find just how you can spray on auto paint really can not be difficult. That doesn’t mean that you go at it and can simply grab a tin of paint. There are some principles you should know. Both in the preparation and application.
Prepare by assembling all your things that you are going to need. Be sure your surrounding area is protected against any possible finished aerosol. Any parts that do not need to be sprayed and that can be removed then do so. For other areas cover well with paper and masking tape.
You’ll need to analyze the car for any rough spots. These will need to be sanded with 300 grit sand paper. This will smooth out the rough spots. It also allows the spray automobile paint to adhere better. Once you’ve finished sanding, be sure all the dust dirt and debris are taken from the vehicle. It is imperative that the car be absolutely clean.
This will make sure that you get an overall even layer of your colored paint plus helps the paint to adhere nicely. Be sure you apply light layers and allow for drying in between, when you spray the primer. The best way to spray on auto paint takes a little getting used to.
Now you’re pretty well to the point where you’re about ready to spray on the color. Before you begin with the automobile either way, make several practice strokes on an object. After you are ready, start the passes with the paint without hesitation. If you hold gun or the spray can in one spot, you’ll end up getting uneven coverage and maybe the paint will run. Should this happen you’ve got a major repair job on your had. You’ll most probably have directions as to how to spray auto paint using the spray or equipment cans.
It’s up to you whether you desire to wet sand between coats of color and primer paints. Check with someone that is comfortable with just how to spray on car paint, or you might want to study this choice on the web
Once you are absolutely satisfied with the color, you are down to the finishing touches. You’ll now want to apply several coats that are clear. This will give the gloss and finished appearance to the car as well as protect the finish. It’ll be up to you personally although likely two coatings will be sufficient. Make absolutely sure it truly is dry in between coats.
If you prefer once more, you’ve the alternative of wet sanding. Again, it is suggested you ask the advice of individuals which can be familiar with how to paint a car. If you determine to follow this measure then you need to wet sand with the following grits in this arrangement. Use 800, 1000, 1200, 1500 and the finally the 2000. This will remove spots that’ll not be too light in the clear coat application.
Now you will need to using a rubbing compound to buff the surface so you can use a 2000 grit to remove any scrapes.
You should now buff the surface. To do this simply use a moderate cut polish. After you have done Alloy Wheel Repair London this, you should have a perfect glassy appearance to the finish.
As a final touch, you may want to apply a few layers of wax.